Product Description
CFR4-203X Telstra/Optus/Vodafone Cel-Fi ROAM R41 Small Building EdgeMax Kit has an advertised coverage of up to 200 square meters and is ideally suited for small areas within the home or office. Boost your cell phone coverage in the living room, dining area, and kitchen in a standard-sized home or a small office, retail space or outbuilding. Switchable between Telstra, Optus, or Vodafone networks with updates manageable via the WAVE App. For low loss extension cables and antenna mounting brackets, see ACCESSORIES below.
* Telstra 5G is not currently enabled due to carrier approval.
| Downloads | |||
 |
Cel-Fi ROAM R41 Mobile Data Sheet | ||
The CEL-FI ROAM R41 builds upon the success of the CEL-FI Go G31 and Go G32 mobile repeaters, offering enterprise-grade performance to overcome poor cellular coverage challenges. With reliable calling, texting, and data connectivity, this innovative device ensures uninterrupted communication when you're on the move.
- Ideal for boosting mobile signal
- Equipped with the latest 4th generation Nextivity proprietary IntelliBoost chip, delivering channelised coverage for specific mobile network operator signals
- Carrier Switching using WAVE App between Telstra or Optus or Vodafone
- Supports 4G and 5G*
- Supports multiple frequencies: 700L/850/900/1800/2100/2600 + Band 20 & 26 (700 band not supported on Vodafone)
- Bluetooth WAVE App for iPhone, Android & Computers
- Suitable replacement for Go G31 Mobile
- Easy installation with plug-and-play operation
Supported Networks when configured for Telstra - Aldi Mobile, Boost Mobile, Woolworths Mobile and more*
Supported Networks when configured for Optus - Optus, Amaysim, Dodo, iiNet, plus more*
Supported Networks when configured for Vodafone - Vodafone Australia, TPG, Redbull Mobile, plus more*
*Note: Some supported networks are not fully featured.
Includes:
- Cel-Fi ROAM R41 Smart Repeater
- 20dBi Yagi/Grid Antenna with 10m LMR400 grade super low loss cable
- 8dBi Indoor Panel Antenna with 6m LMR195 grade low loss cable
- 240v Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi ROAM R41 Quick Start Guide and any other information contained in the box. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Use our online Contact Form for quick response.
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
