There are no products listed under this category.
The Cel-fi Smart Repeater is a mobile phone booster and wireless broadband signal booster that increases the mobile signal in your home, office, vehicle and outdoor areas resulting in fewer dropped calls. The Cel-Fi Smart Repeater handles multiple devices and improves voice quality and data speeds. Solve your cellular coverage problems with 3G / 4G / 5G Smart Repeaters for Telstra, Optus, Vodafone and other third party carriers. Available now for immediate shipment. Our Cel-Fi Repeaters are 100% legal approved by the network carriers and ACMA.
Repeaters and Mobile Phone Boosters – Are they legal? Find out here
There are no products listed under this category.
Cel-Fi Model Comparison
This handy Cel-Fi Smart Repeater comparison table will give you insight into the various model capabilities and the evolution of the product from 2013 when the first model was approved for use in Australia. Note that the Cel-Fi mobile phone booster models below have been tested and approved by the ACMA and individual Carriers. The Cel-Fi models shown are the only repeaters that can be legally used in Australia.
Model | PRO | GO (G31) | GO X (G32) | GO 4 (G41) | GO G51 |
ROAM R41 |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Released | 2015 (2013 3G only) |
2017 | 2018 | 2022 | 2023 |
2023 |
SKU# | CFP1000 CFP2000 CFP3000 | CFGM-100 CFGS-200 CFGO-100 |
CFGX-100 | CFG4-100 | CFG5-100 |
CFR4-100 |
Coverage | 3G/4G | 3G/4G | 3G/4G | 3G/4G/5G* | 3G/4G/5G |
3G/4G/5G* |
Coverage Area |
900²m | 900²m | 1400²m | 3000²m | 3000²m | Inside Vehicle |
Bands Boosted | 2 | 1 | 2 | 2 | 2 |
1 |
Mode Switching | NO | YES | YES | NO | NO |
NO |
Modes | Stationary only | Stationary or Mobile | Stationary or Mobile | Stationary only | Stationary only | Mobile only |
Carrier Switching** | NO | NO | YES | YES | YES |
YES |
Carriers | Telstra Optus or Vodafone | Telstra or Optus | Optus or Vodafone | Telstra Optus or Vodafone | Telstra Optus or Vodafone | Telstra or Optus |
* 5G not currently available, pending Carrier approval. |
||||||
** Carrier Switching where supported allows selection of one carrier at a time. |
Cel-Fi Applications - Stationary Mode
The Cel-Fi Smart Repeater is scalable mobile phone booster that can be configured for various building applications. By splitting the output of the amplifier module, multiple coverage areas (up to 4+) can be accommodated. For larger areas or multi carrier applications, multiple units can be used. Applications include small to large residential buildings, commercial premises, retail shops, warehouses, multi level buildings and outdoor applications including combinations of indoor and outdoor areas. Apart from our standard kits, Comnet can design a custom mobile phone booster system for your building.
Application Examples for buildings (G31, G32 and G41 Stationary Mode) | |||
![]() |
![]() |
![]() |
![]() |
CFGS-203 Building Edge Kit showing typical layout of antennas, cabling and components in a single level house with single coverage antenna. | CFGS-211 DAS Building Edge Kit showing typical layout of antennas, cabling and components in a two level House with two coverage antennas. | CFG4-211 DAS Building Edge Kit showing typical layout of antennas, cabling and components in a single level house with one internal coverage antenna and one external coverage antenna. | CFG4-211-4 DAS Building Edge Kit showing typical layout of antennas, cabling and components in a two level large building with four internal coverage antennas. |
Cel-Fi Applications - Mobile Mode
The Cel-Fi Smart Repeater is a mobile phone booster that can be configured for various vehicle applications when set to Mobile mode using a Cel-Fi GO G31 or Cel-Fi GO X G32. Applications include cars, 4WD, motor homes, trucks, commercial vehicles, caravans, boats and many other mobile applications including farming and mining equipment.
Application Examples for vehicles, caravans and boats (G31 and G32 Mobile Mode) | |||
![]() |
![]() |
![]() |
![]() |
CFGM-103B Trucker Edge Kit showing typical layout of antennas, cabling and components in a 4WD vehicle. | CFGM-204 Caravan Kit showing typical layout of antennas, cabling and components in a caravan. | CFGM-204S Marine Kit showing typical layout of antennas, cabling and components in a medium size boat. | CFGM-105C Campsite Trucker Kit showing typical layout of antennas, cabling and components. Includes a tripod for mounting the external antenna to create a coverage area at your campsite or worksite. |
Cel-Fi Product Road Map (updated 27/6/2023)
Cel-Fi EOL model | Current Availabilty |
Replacement model |
Telstra GO G31 Stationary | In stock | Go G41 or G51- In stock |
Telstra GO G31 Mobile | Low stock | ROAM R41 - In stock |
Optus GO G31 Stationary | In stock | Go G41 or G51- In stock |
Optus GO G31 Mobile | Low stock | ROAM R41 - In stock |
Optus GOX/GO2 G32 Stationary | In stock | Go G41 or G51- In stock |
Optus GOX/GO2 G32 Mobile | In stock | ROAM R41 - In stock |
Vodafone GOX/GO2 G32 Stationary | In stock | Go G41 - In stock |
Vodafone GOX/GO2 G32 Mobile | In Stock | ROAM R41 - pending Vodafone approval |
PRO (all carriers) | No Stock | CONNECT C41 - End of Sept 2023 |
STOCK UPDATE - All Cel-Fi GO G31 and G32 units and kits still available for immediate shipment.