Product Description
Telstra/Optus/Vodafone* Cel-Fi Go G51 Self Install Kit is suitable for building applications and is designed to boost multiple bands from a single selected carrier. Ideal for boosting mobile signal in homes, apartments, retail stores or for temporary coverage applications. The G51 is designed to bring the power of the 5G network indoors and solves coverage problems by providing up to 100dB signal gain.
Applications
- Small Homes
- Apartments
- Retail stores
- Renters
- Holiday Rentals
- High Rise Office Buildings
- Historic Buildings
Easy 5 Min Setup
1) Find a window in the building offering the best coverage
2) Attach the adhesive antenna holder to the window and insert the donor antenna
3) Connect donor and service antennas to the G51 and power up
4) Move the service antenna at least 4m away from the donor antenna at the window
5) Find the optimal position for the service antenna, then put on a shelf, mount to a wall or on the ceiling
You can set the unit to boost either Telstra (approved), Optus (approved) or Vodafone* (* pending approval) and easily switch between them should you decide to change carrier in the future. For extra cable length options, see ACCESSORIES below.
| Downloads | |||
 |
Cel-Fi Go G51 Stationary Data Sheet | ||
Cel-Fi Go G51 Smart Repeater represents the latest in cellular repeater technology. Building on the success of the G41 model.
Cel-Fi Go G51 Smart Repeater is ideal for large inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.
Features:
- Mid-band (3.5 GHz) 5G NR coverage with 100 MHz channel bandwidth
- Dual-band relay to extend 2G/3G/4G coverage with mid-band 5G NR
- Powered by the latest 4th generation Nextivity proprietary IntelliBoost chip, delivering industry-leading and unconditionally network safe performance
Includes:
- 1 x Cel-Fi Go G51 Smart Repeater
- 2 x 8dBi Universal Ceiling-Wall Antenna
- 1 x Window Mount for Universal Ceiling-Wall Antenna
- 1 x 6m LMR195 grade low loss antenna cable
- 1 x 1m LMR195 grade low loss antenna cable
- 1 x Window Mount for Universal Ceiling-Wall Antenna
- 1 x 240V Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi GO Quick Start Guide and any other information contained in the box. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Use our online Contact Form for quick response.
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
 |
 |
|
||||
| 5m Antenna Cable LMR195 SMA Male to SMA Female | 10m Antenna Cable LMR195 SMA Male to SMA Female |
