Product Description
Telstra/Optus/Vodafone Cel-Fi Go G41 Smart Repeater Self Install Kit 3G/4G/5G* is suitable for building applications and is designed to boost multiple bands from a single selected carrier. You can set the unit to boost either Telstra, Optus or Vodafone and easily switch between them should you decide to change carrier in the future. Ideal for boosting mobile signal in homes, apartments, retail stores or for temporary coverage applications. The kit includes a 2 x 8dBi Panel Antennas with a Window/Wall Mounting Sleeve and cables. For cable length options and battery backup, see ACCESSORIES below.
* Telstra 5G is not currently enabled due to carrier approval.
| Downloads | |||
 |
Cel-Fi Go G41 Data Sheet | ||
Applications
- Small Homes
- Apartments
- Retail stores
- Renters
- Holiday Rentals
- High Rise Office Buildings
- Historic Buildings
Easy 5 Min Setup
1) Find a window in the building offering the best coverage
2) Attach the adhesive antenna holder to the window and insert the donor antenna
3) Connect donor and service antennas to the G51 and power up
4) Move the service antenna at least 4m away from the donor antenna at the window
5) Find the optimal position for the service antenna, then put on a shelf, mount to a wall or on the ceiling
Cel-Fi Go G41 Smart Repeater represents the latest in 4G cellular repeater technology. Building on the success of the GO2 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.
Cel-Fi Go G41 Smart Repeater operates on more frequency bands, now supporting Optus 700 MHz and 2300 MHz 4G networks, and can be easily switched between Telstra, Optus and Vodafone-TPG should you change service provider.
Cel-Fi Go G41 Smart Repeater is ideal for large inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.
Expanding on GO2’s dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.
Features:
- 700L/850/900/1800/2100/2300/2600 MHz (700 band not supported on Vodafone)
- 3G, 4G, VoLTE, NB-IoT (GO4 has 5G capabilities, but currently not enabled or approved)
- Carrier Switching using WAVE App between Telstra, Optus or Vodafone
- Up to 3000 m2 coverage area
- Two band simultaneous relay
- Total System Relay Bandwidth – Up to 40 MHz
- Remote Monitoring, Control and Alert Capabilities via WAVE Portal
- Ethernet Port for connection to internet source for live monitoring
Includes:
- 1 x Cel-Fi Go G51 Smart Repeater
- 2 x 8dBi Universal Ceiling-Wall Antenna
- 1 x Window Mount for Universal Ceiling-Wall Antenna
- 1 x 6m LMR195 grade low loss antenna cable
- 1 x 1m LMR195 grade low loss antenna cable
- 1 x Window Mount for Universal Ceiling-Wall Antenna
- 1 x 240V Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi GO Quick Start Guide and any other information contained in the box. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Use our online Contact Form for quick response.
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
 |
 |
|
 |
|||
| 5m Antenna Cable LMR195 SMA Male to SMA Female | 10m Antenna Cable LMR195 SMA Male to SMA Female | Cel-Fi G31/G41 Battery Backup 12V 89W |
