Product Description
Telstra Cel-Fi Go Smart Repeater Stationary Building 3G/4G/4GX Kit is suitable for building applications and includes a Pole Mount Log Periodic Directional Antenna (LPDA) with 10m cable and Coverage Panel Antenna with 6m cable. For cable length options, lightning arrestor, battery backup and antenna mounting pole, see ACCESSORIES below.
The Coverage Antenna can be optionally replaced with a selection of high performance Ceiling Coverage Antennas. See selection here:
Wall Panel Ceiling Dome Pulse Ultra-thin White Ceiling Dome Pulse Ultra-thin Translucent Ceiling Dome
Telstra Cel-Fi Go Smart Repeater Stationary model is based on the Nextivity's Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network.
Telstra Cel-Fi Go Smart Repeater is a one box coverage solution for Telstra's Next G® and 4GX networks operating on 3G 850Mhz or 4G 700/1800MHz bands. It is designed to dramatically boost voice quality and increase data speeds for residential and commercial applications.
Telstra Cel-Fi Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
- For indoor and outdoor applications
- Up to 900m² indoor coverage area
- Requires external and internal antennas
- Locked to Telstra's Mobile Network
- Carrier approved
- Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks - Telstra, Aldi Mobile, Boost Mobile, Woolworths Mobile and more*
*Note: Some supported networks are not fully featured.
Includes:
- Telstra Go Smart Repeater Stationary model - 100dBi
- Log Period Yagi Antenna (LPDA) with 10m 240 grade cable
- Indoor Panel Antenna with 6m 195 grade cable
- 240V Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi GO Mobile Quick Start Guide and Cel-Fi GO Stationary Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Call (02) 9899 5700 and ask for Telstra Smart Repeater support or email sales@comnet.com.au
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES