Product Description
Optus Cel-Fi Go Smart Repeater Stationary DAS Building Edge Kit 3G/4G Distributed Antenna System (DAS) model is suitable for building applications. Includes a High Performance Yagi/Grid Edge Donor Antenna with Super Low Loss 10m cable and two (2) Panel Coverage Antennas with 10m cable. One or both Panel Coverage Antennas can be supplied as outdoor weatherproof Anti-UV ABS pole mount version upon request. For cable length options, lightning arrestor, battery backup and antenna mounting pole, see ACCESSORIES below.
Optus Cel-Fi Go Smart Repeater Mobile model is based on the Nextivity's Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Optus for use on the Optus Mobile Network.
Optus Cel-Fi Go Smart Repeater is a one box coverage solution for Optus 3G and 4G networks operating on 3G 900Mhz or 4G 700/1800MHz bands. It is designed to dramatically boost voice quality and increase data speeds for in vehicle applications.
Optus Cel-Fi Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
- For building and vehicle applications
- Requires external donor antenna
- Locked to Optus Mobile Network
- Carrier approved
- Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks - Optus, Amaysim, Dodo, iiNet, plus more*
*Note: Some supported networks are not fully featured.
Includes:
- Optus Cel-Fi Go G31 Smart Repeater - 100dBi
- Yagi/Grid twin element Antenna with 10m 400 grade cable
- Two (2) Panel Antennas with 10m 195 grade cables
- 2-way splitter with 0.25m 195 grade cable
- 240V Mains Power Supply (optional 12V cigarette lighter plug)
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
