Product Description
Optus Cel-Fi Go Smart Repeater Stationary DAS Building Kit 3G/4G. Distributed Antenna System (DAS) model is suitable for building applications and includes a Log Periodic Directional Antenna (LPDA) with 10m cable and two (2) Panel Coverage Antennas with 10m cable. One or both Panel Coverage Antennas can be supplied as outdoor weatherproof Anti-UV ABS pole mount version upon request. For cable length options, lightning arrestor, battery backup and antenna mounting pole, see ACCESSORIES below.
Optus Cel-Fi Go Smart Repeater Mobile model is based on the Nextivity's Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Optus for use on the Optus Mobile Network.
Optus Cel-Fi Go Smart Repeater is a one box coverage solution for Optus 3G and 4G networks operating on 3G 900Mhz or 4G 700/1800MHz bands. It is designed to dramatically boost voice quality and increase data speeds for in vehicle applications.
Optus Cel-Fi Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
- For building and vehicle applications
- Requires external donor antenna
- Locked to Optus Mobile Network
- Carrier approved
- Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks - Optus, Amaysim, Dodo, iiNet, plus more*
*Note: Some supported networks are not fully featured.
Includes:
- Optus Cel-Fi Go G31 Smart Repeater - 100dBi
- Log Period Yagi Antenna (LPDA) with 10m 240 grade cable
- Two (2) Panel Antennas with 10m 195 grade cables
- 2-way splitter with 0.25m 195 grade cable
- 240V Mains Power Supply (optional 12V cigarette lighter plug)
Specifications are subject to change without notice. Picture may not be exact model as described.
ACCESSORIES
