5dBi Omni Car Window Antenna with FME Female Connector, 3m cable included. Designed to mount "easily" on a car window. Just place on an open car window so the antenna is outside and the cable in inside. Close the window and it's ready to go. Supports GSM, 3G and 4G networks. Requires a patch lead for connection to the wireless modem or mobile phone. Select a patch lead to suit from our patch lead section.
|Supported frequencies shown in GREEN
|Note: Antenna gain may vary depending upon frequency.
Modems: A patch lead is required to complete the antenna connection to the modem. There are two types of patch leads to suit modems depending upon the availability of an external antenna connector on the modem. For modems with an external antenna connector, the patch lead has an FME male connector at one end for connection to the antenna, and a device specific connector at the other end for the modem. For modems without an external antenna connector, the patch lead is similar except it has a stick-on Velcro pad, instead of a connector. These work by proximity induction and require the pad or clip to be placed on the modem. The signal is transferred to the devices internal antenna by electromagnetic induction.
Phones: A patch lead or cradle is required depending upon the availability of an external antenna connector. Patch leads can be used as described above, however, cradles are a more convenient way to connect an antenna to a mobile phone. Cradles can be used in a vehicle or on the desktop. When the phone is placed in the cradle the connected antenna signal couples to the phones internal antenna by electromagnetic induction. Comnet carries a wide range of cradles specifically for the most popular smart phones and a universal model to suit any phone.
Use these links to select a patch lead or cradle for your device.
Select from here: Patch Leads Phone Cradles/Holders
Specifications are subject to change without notice. Picture may not be exact model as described.