3dBi Omni Antenna-Cabinet/Surface Mount SMA,GSM, 3G and 4G


3dBi Omni Antenna-Cabinet/Surface Mount SMA,GSM, 3G and 4G

Product no.: NG3OMNI-K6-S

In Stock

$45.00
Inc.GST
Delivery Estimator Calculates delivery cost for this product


help_logo1.jpg
 
Selecting an antenna

3dBi Cabinet Antenna with 1.5m cable and SMA Male Connector. This antenna is designed for applications where an unobtrusive reasonably vandal proof low profile (140mm x 45mm x 23mm) antenna is required for mounting on a cabinet or enclosure such as ATM's, Vending Machines, Monitoring and Control Stations. Mounts via two screws and has side or bottom cable entry. Supports GSM, 3G and 4G networks. Requires a patch lead for connection to the wireless modem or mobile phone. Select a patch lead to suit from our patch lead section.   

 

FREQUENCY TABLE
MHz 700 850 900 1800 2100 2300 2600
Supported frequencies shown in GREEN
Note: Antenna gain may vary depending upon frequency.

 

Important Information:
Modems: A patch lead is required to complete the antenna connection to the modem. There are two types of patch leads to suit modems depending upon the availability of an external antenna connector on the modem. For modems with an external antenna connector, the patch lead has an FME male connector at one end for connection to the antenna, and a device specific connector at the other end for the modem. For modems without an external antenna connector, the patch lead is similar except it has a stick-on Velcro pad, instead of a connector. These work by proximity induction and require the pad or clip to be placed on the modem. The signal is transferred to the devices internal antenna by electromagnetic induction. Note that this antenna has an SMA Male connector therefore you need to select a patch lead that has SMA female end instead of FME male. We have a range of the most popular patch leads with SMA female connectors on the link below.

Phones: A patch lead or cradle is required depending upon the availability of an external antenna connector. Patch leads can be used as described above, however, cradles are a more convenient way to connect an antenna to a mobile phone. Cradles can be used in a vehicle or on the desktop. When the phone is placed in the cradle the connected antenna signal couples to the phones internal antenna by electromagnetic induction. Comnet carries a wide range of cradles specifically for the most popular smart phones and a universal model to suit any phone.

Use these links to select a patch lead or cradle for your device.

Select from here: Patch Leads  Phone Cradles/Holders (note: cradles require an SMA/F to FME/F adapter (AD4011) to connect to this antenna)

Specifications are subject to change without notice. Picture may not be exact model as described.

We also recommend

*
Inc.GST