Telstra Cel-Fi Go Smart Repeater Stationary Metro Kit 3G/4G/4GX is suitable for metropolitan area building applications. Includes Wall or Pole Mount Omni External Donor Antenna with 5m cable and Ceiling Dome Coverage Antenna with 6m Cable.
The Coverage Antenna can be optionally replaced with a selection of high performance Ceiling Coverage Antennas. See selection here:
Wall Panel Ceiling Dome Pulse Ultra-thin White Ceiling Dome Pulse Ultra-thin Translucent Ceiling Dome
Telstra Cel-Fi Go Smart Repeater Stationary model is based on the Nextivity's Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network. Optional installation service is available, see CFGS-INST01 or CFGS-INST07.
Telstra Cel-Fi Go Smart Repeater is a one box coverage solution for Telstra's Next G® and 4GX networks operating on 3G 850Mhz or 4G 700/1800MHz bands. It is designed to dramatically boost voice quality and increase data speeds for residential and commercial applications.
Telstra Cel-Fi Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the abilty to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
- For building and other applications
- Up to 900m² indoor coverage area
- Includes external and internal antennas
- Locked to Telstra's Mobile Network
- Carrier approved
- Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks - Telstra, Aldi Mobile, Boost Mobile, Woolworths Mobile
- Telstra Cel-Fi Go Smart Repeater - 100dBi Stationary model
- 7dBi OMNI Antenna with wall/pole mount and 5m LMR195 cable
- Ceiling Dome Antenna with 6m LMR195 cable
- 240V Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi GO Mobile Quick Start Guide and Cel-Fi GO Stationary Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Call (02) 9899 5700 and ask for Telstra Smart Repeater support or email firstname.lastname@example.org
NOTE: Cel-Fi repeaters require registration before they can be used. Please complete this online form and we register prior to delivery.
Specifications are subject to change without notice. Picture may not be exact model as described.