Optus Cel-Fi Go 2 Smart Repeater Stationary Heavy Duty Metro Kit 3G/4G is suitable for metropolitan area building applications. Includes Wall or Pole Mount Omni External Donor Antenna with 10m cable and Panel Coverage Antenna with 6m Cable.
Optus Cel-Fi Go 2 Smart Repeater is based on the Nextivity's Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Optus for use on the Optus Mobile Network. Optional installation service is available, see CFGS-INST01 or CFGS-INST07.
Optus Cel-Fi Go 2 Smart Repeater is a one box coverage solution for Optus 3G and 4G networks operating on 3G 900/2100MHz & 4G 1800/2600MHz bands. It is designed to dramatically boost voice quality and increase data speeds for in vehicle, 4WD and building applications.
Optus Cel-Fi Go 2 Smart Repeater offers a more flexible installation over other Cel-Fi models due to the abilty to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
- For indoor and outdoor building applications
- Up to 900m² indoor coverage area
- Includes external and internal antennas
- Locked to Optus's Mobile Network
- Carrier approved
- Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks - Optus, Amaysim, Dodo, iiNet, plus more
- Optus Cel-Fi Go 2 Smart Repeater - 100dBi
- 6dBi Heavy Duty OMNI Antenna with wall/pole mount and 10m 240 grade cable
- Indoor Panel Antenna with 6m 195 grade cable
- 240V Mains Power Supply
Installation should be carried out strictly in accordance with the Cel-Fi GO Mobile Quick Start Guide and Cel-Fi GO Stationary Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Call (02) 9899 5700 and ask for Telstra Smart Repeater support or email firstname.lastname@example.org
Specifications are subject to change without notice. Picture may not be exact model as described.